Products & Components
All components are CNC machined to your drawing on our 3-axis CNC VMC. Standard or custom — send a drawing for a quote within 24 hours.
Hydraulic & Pneumatic
Precision manifold blocks, valve bodies, cylinder components and pneumatic port blocks for process and automation industries.
Hydraulic Manifold Block
Custom-designed aluminium or MS manifold blocks with multiple port configurations (P, T, A, B) for hydraulic circuits. Machined flat faces, cross-drillings and threaded ports.
Valve Body (Custom)
Precision-machined MS and SS valve bodies for directional control, pressure relief and check valves. All port faces flat within 0.01 mm.
Cylinder End Cap
Hydraulic cylinder end caps, gland nuts and piston rods machined to tight bore tolerances. Both standard and custom thread forms.
Pump Adapter Flange
SAE hydraulic flanges and adapter plates for pump and motor mounting. All bolt patterns machined on CNC for accurate alignment.
Port Plate / Distribution Block
Multi-station port distribution plates with precision-bored galleries and multiple outlet positions. Ideal for hydraulic power packs.
Pneumatic Solenoid Valve Block
Aluminium pneumatic sub-base and valve island blocks with ported galleries for G1/8" to G1/2" solenoid valves.
Pump & Process
Pump impellers, housings, flanges and stuffing boxes for agricultural, industrial and petrochemical applications.
Pump Impeller
Open and semi-open impellers for centrifugal pumps machined from SS 316, bronze or cast iron. Balancing done on request.
Pump Casing / Housing
Volute pump casings and housings machined from CI or MS with precision bore and face milling. Suction and delivery flanges drilled to IS standard.
Stuffing Box
Precision-bored stuffing boxes and mechanical seal housings for industrial pumps. Bore to H7/H8 tolerance.
Wear Ring / Casing Ring
Replaceable wear rings and casing rings for centrifugal pumps. Machined in pairs for precise running clearance.
Pump Shaft Sleeve
Shaft sleeves and shaft protection sleeves for pumps and agitators. Tight bore-to-OD concentricity within 0.01 mm.
Pharma Machinery
Stainless steel SS 316L components for pharmaceutical equipment — reactor nozzles, agitator impellers, CIP nozzles.
Reactor Nozzle / Fitting (SS)
Precision SS 316L nozzles, stubs and connections for pharmaceutical reactors and vessels. Ra 0.8 µm surface finish standard.
Agitator Impeller (SS)
Turbine, paddle and anchor agitator impellers machined from SS 316 for pharmaceutical mixing vessels. Custom hub dimensions.
CIP Spray Nozzle (SS)
Clean-In-Place spray nozzles and spray balls machined from SS 316L. Internal spray holes drilled to ±0.1 mm for uniform coverage.
Sanitary Ferrule / Tri-Clamp End
SS 316L sanitary ferrules, tri-clamp ends and tube stubs to DIN 32676 / ISO 2853 standards for hygienic piping.
Vessel Cover Flange (SS)
Large-diameter SS 316L flanges and cover plates for reactor vessels and storage tanks. Face milled to Ra 1.6 µm.
Electronics & PCB
Custom aluminium enclosures, heat sinks, PCB chassis and control panel components for electronics OEMs.
Aluminium Enclosure (Custom)
Custom-machined aluminium 6061 enclosures with precise cutouts, tapped holes, countersinks and EMI shielding grooves.
Heat Sink (Custom Fin)
Custom aluminium heat sinks with precision fin profiles and base flatness < 0.05 mm for power electronics, motor drives and LED fixtures.
PCB Mounting Chassis
Aluminium PCB frames, DIN rail mounting plates and chassis for control panels and switchgear. Standoffs and slots milled to drawing.
Motor Drive Housing
Aluminium die-cast replacement housings and machined covers for VFDs and servo drive units. Precision machining of existing casting.
Battery Pack Housing
Machined aluminium battery pack enclosures with cell slot pockets, cooling channel features and IP-rated sealing grooves.
Automotive Parts
Engine brackets, transmission spacers, suspension components and test fixtures for automotive Tier-2 suppliers.
Engine Mounting Bracket
Aluminium and MS engine brackets, sensor mounts and hose routing brackets for automotive applications. All hole positions to ±0.05 mm.
Auto Part Test Fixture
Go/No-Go gauges and functional test fixtures for automotive component QC inspection. Locating pins, clamps and reference surfaces.
Transmission Spacer / Shim
Precision-ground spacers and shims for transmission assemblies. Thickness tolerance ±0.005 mm, parallelism < 0.003 mm.
Sensor Housing / Boss
Precision-machined aluminium and steel sensor housings for temperature, pressure and position sensors. Thread forms to DIN standard.
Jigs & Fixtures
Custom drill jigs, milling fixtures, inspection gauges and welding fixtures for any manufacturing process.
Drill Jig
Box-type and plate-type drill jigs with hardened drill bushings (slip renewable, liner) for accurate hole location in production runs.
Milling Fixture
Precision milling and turning fixtures with locators, hydraulic/toggle clamps and datum surfaces for fast setup and repeat production.
CMM / Inspection Fixture
Lightweight aluminium CMM fixtures and inspection gauges. Datum repeatability better than 0.005 mm. Kinematic mounts on request.
Welding Fixture
Steel welding fixtures with locating pins, V-blocks and clamping pads to hold components in position during MIG/TIG welding.
General Engineering
Shafts, bushes, spacers, tooling plates and custom replacement parts for any industrial requirement.
Precision Shaft
Turned and milled shafts, stub shafts and spindles with keyways, threads and bearing seats. Multiple diameters, any length up to 1,200 mm.
Tooling Plate
Precision aluminium 6061 tooling plates with grid-pattern tapped holes (M6, M8, M10) for flexible workholding setups.
Custom Bush / Liner
Plain and flanged bushes, wear liners and bearing housings machined to H7/H6 bore tolerance. Any material, any size.
Reverse Engineered Replacement Part
No drawing? No problem. Send us the worn or broken part — we measure, model and machine an exact replacement. All materials.
Don't See What You Need?
We machine any custom part from your drawing. Send us the file and we'll quote immediately.
Submit Custom Drawing